Lidar for Area Protection

These machines are often accompanied by high pressure and high-speed movement during operation, so the safety risk is high. Safety laser scanners can monitor the working area in real time and quickly trigger the shutdown mechanism once an operator approaches or enters the danger zone.

Basic profile
The XD-TOF-20D series of laser radars of the 2D laser scanner adopts the TOF (time of flight) solution, which can perform 2D scanning and detection of the surrounding 270° environment. According to the different detection distances, it is divided into 5-meter and 20-meter models, and the measurement frequency of the 2D laser radar sensor can reach 15 Hz/30 Hz. The design detection accuracy can reach +/-3cm. As a low-cost TOF solution, this series of laser radars mainly AGV obstacle avoidance and factory equipment area detection.

Parameter

Number: XD-TOF-20D	Minimum angular resolution:0.1°/0.3°
Power consumption (heating module off) <8.4W	Measurement error:±30 mm
Light resistance＜80000lux	Service voltage:DC 9 V ~ 28 V
Application angle: 270°	3 regions / 16 group * 3 regions
Scanning frame rate: 15 Hz/30 Hz	Working temperature: –10 °C ~ +55°C
Protection distance:0.05~20m	Interface: Ethernet

Product Advantages

05D-

Scanning Range/Reflection

05D-

1) Two-dimensional sector area, scanning range 270°, resolution 0.1°/0.3°

2) Anti-glare less than 15,000 lux

3) Integrated rotation design, ±30 mm

4) Three interfaces: USB/three switch quantities

Software Diagram

05D-

Product Size

05D-

Applications

Stamping machine
These machines are usually accompanied by high pressure and high-speed movement during operation, so the safety risk is relatively high. Safety laser scanners can monitor the working area in real time, and once the operator is detected approaching or entering the danger zone, the shutdown mechanism will be quickly triggered.

product-1-1