Case show / Safety light curtain case

The customer needs to establish a protective area around the equipment. If personnel or objects cross the detection area, the equipment will stop working, allowing for safe operation. Due to the lack of a suitable location for installing safety light curtains around the customer, we have installed a floor bracket to allow the safety light curtains to be installed in the desired position.

The customer needs to install a safety light curtain in the punching equipment. We have a completely suitable model for the location where the customer can install it. The protection height covers the entire dangerous area. If any object crosses the detection range, the safety light curtain will immediately trigger a signal to control the punching equipment to stop working.

In the weighbridge system, the entire weight of the vehicle needs to be accurately measured when the vehicle passes through the weighing. If the distance between vehicles is too close or uneven, some vehicles may not fully pass through the weighing sensor, resulting in inaccurate weighing. The vehicle separation light curtain monitors the position and separation of vehicles in real time to ensure that each firefighter fully passes through the weighing area, ensuring the accuracy of the weighing data.

The parking lot of the commercial center has a large daily traffic volume, with frequent vehicles entering and exiting. Especially during peak hours, the parking lot often experiences congestion, traffic chaos, and insufficient distance between vehicles. In order to improve the management efficiency of the parking lot and the parking experience of customers, the parking lot management decided to introduce a vehicle separation light curtain system. This light curtain system uses laser sensors and infrared technology to monitor and judge the distribution status of vehicles in real time. The vehicle separation light curtain can ensure the safe separation of vehicles in the parking area, prevent vehicles from being parked too closely, and reduce accidents and friction.

Multiple light curtains are set up outside the operating radius of the robotic arm to divide the safety distance and form an electronic fence, allowing technicians to temporarily close some detection areas through authorized tools for equipment debugging or maintenance.

Install a safety light curtain around the laser cutting machine to form a protective barrier. When personnel or objects accidentally enter the dangerous area, the light curtain triggers an emergency stop of the equipment by blocking the signal.