Industrial Safety MatInstallation And Use Guide

Before installation, it is necessary to accurately measure the dimensions of the laying location in advance, and then place an order based on the measurement results. Since safety Mats support customization, the accuracy of the dimensions is particularly important. If the dimensions exceed a specific range, such as 2000*1000mm, splicing may be required.

After the safety Mat arrives, the integrity of the entire set of products must be fully inspected. The inspection includes the safety Mat body, presser foot, press edge, signal cable, and possible safety relays. Make sure that all accessories are complete and free of any damage.

Place the safety Mat in the predetermined installation location, and lay the cables and press edges at the same time. Use expansion bolts to fix the press angle to ensure that the Mat is stable and will not move easily.

When the safety Mat is used in harsh working conditions, such as places with a lot of oil, it is recommended to install wooden or plastic boards at the bottom of the Mat to play the role of oil separation. In addition, the Mat needs to be cleaned regularly to prevent damage from oil, water, dust, acid and alkali substances.

Regularly check the working status of the safety Mat to ensure its normal operation. Focus on checking whether the cables, presser feet, press edges and other components are intact, loose or damaged.

Avoid placing items that may interfere with the safety Mat around it, such as large machinery, power supplies, etc., to prevent affecting its normal function.

Provide professional training for operators to understand the working principle, use method and precautions of the safety Mat, and ensure that they can use and maintain the safety Mat correctly.

In short, strictly follow the above steps to install the industrial safety Mat and follow the corresponding precautions for use, so that the safety Mat can play its full role and provide solid protection for workplace safety.