Download the product brochure to view all parameters
Application of safety edge sensor
1. Introduction to safety touch edge products
The safety edge is used to detect hazards such as squeezing or shearing of moving parts to people. It is a close-up safety protection device for automatic equipment, which meets the highest safety protection requirements and is used to ensure the safety of people in dangerous areas such as pinching, squeezing, and collision. The safety touch edge has the following
The safety edge and the controller together form a flexible and versatile emergency stop system.When using this system, the robot operator and installer must be able to stop the dragging device easily and conveniently.
1.3 The split Safety Edge edge includes an aluminum guide rail, a safety rubber sleeve and a built-in induction signal belt; the special shape of the Safety Edge edge (rubber side) can protect the signal belt from damage and allow the impact angle of the Safety Edge edge to exceed 90°.The induction signal tape can also be used alone (adhered with adhesive).If your device has hollow rubber strips, you can also use pass-through signal strips.
- lSensor length 200mm~7000mm.
- lCan be bent, suitable for various mechanical protection occasions.
- lProtection level IP65, suitable for use in various working conditions.
- lMore than 3 million mechanical service life.
- lThe outer cover is made of EPDM rubber, which is resistant to various chemical corrosion and is suitable for use in
- factories, general working conditions and civiloccasions.
- lNot suitable for fast-moving robots to protect people from harm
Safety touch edge applications
The application scope of safety touch edge includes but is not limited to the above examples. If necessary, please email or online consultation.
Our email is: sale1@cyndar.net
WhatsApp: 861892215536
Precautions for safe touch edge applications
Storage and use environment requirements
①Do not store or use this safety edge device under direct sunlight for a long time
②Do not store and use outside the ambient temperature of -35℃ to +80℃.
③Do not store and use outside the air pressure range of 86~106KP.
④Do not store and use in an environment containing strong corrosive or flammable gas
Hot Tags: AGV Touch Edge Safety Edge Sensor System, China, manufacturers, factory, buy, price, cheap, safety edge bumper switch, safety edges on swing gates, safety contact edge
