XD-TOF-05D 2D laser scanner is used to cut the edge of the machine to prevent people from entering the dangerous area. When the scanner detects that there is a person or object intruding into the cutting boundary, it will output a switch signal to control the cutting machine to stop working.
1. System architecture and hardware deployment
Equipment topology design
Scanner installation: horizontally arranged along the working surface of the cutting machine (0.8-1.2m from the ground), forming a 270° fan-shaped monitoring area, covering the dangerous area with a radius of 5m (including the tool movement trajectory and material splashing area)
Redundant configuration: dual scanners are used for cross-coverage of key workstations (overlap rate ≥30%) to eliminate monitoring blind spots
Linkage control module
Signal processing: connect the switch signal (24VDC PNP type) to the equipment emergency stop circuit through a safety relay (response time ≤15ms)
Logic optimization:
Trigger condition = continuous intrusion ≥0.1 seconds + scanning frame number 3 consecutive frames confirmed
Avoid instantaneous interference false triggering (such as splashing debris)
FAQ
1. Can I order samples to check the quality?
of course can! You can order one or several fixed samples to check the quality.
2. How long can I get after payment?
The payment will be sent within 3 working days after you confirm the payment.
We will send it to you by Express via Fedex, DHL or Air. You will receive it within 3-5 days.
3. When can I get a quote?
Answer: We usually quote within 12 hours after receiving your inquiry.
If you are very urgent, please contact us by phone, email, Skype or whatsapp/wechat.
