On the CNC machine tool, the slide table is used to send the workpiece into the processing area. The XD-TOF-05D safety laser scanner can be installed on the upper end of the door valve of the CNC machine tool for protection. The laser sensor touches the dangerous area, and the radar sensor issues a warning. It can also be installed under the roller conveyor to protect the dangerous area below and reduce the complexity and danger of automation.
1. Core protection scenarios and technical implementation
1. Upper protection system of machine tool gate valve
Hardware deployment
Install a scanner at the top crossbeam of the gate valve, tilted downward by 15° (coverage range: horizontal 270°×vertical 50°), and the detection radius is extended to 3.5 meters
Constitute a redundant detection array with radar sensors (24GHz frequency band), with a false alarm rate of <0.01 times/hour
Core functions
Dynamic demarcation of dangerous areas:
▶ Establish a sector-shaped monitoring area under processing status (depth 2.5 meters/height 1.2 meters)
▶ Cut off the slide servo power supply within 0.05 seconds after detecting intrusion (through PNP type switch output)
Intelligent calibration mechanism:
Automatically perform reference surface calibration every 8 hours (compensation for thermal deformation error ≤±1mm)
Link the CNC system to update the safety zone parameters when the tool is replaced
FAQ
1) Are you a factory?
we are factory.
2) How long have you been in the lidar industry?
Our company has 7 years of experience in laser scanners.
3) Can you propose a solution based on the customer's problem?
Provide professional advice based on customer and industry information.
4) What is the operating temperature of our lidar?
Operating temperature of our lidar: -10℃~55℃5
